| London`s leaders in dry lining and partitioning |
Outstanding workmanship top quality and fair pricing.
|
-Shaft Wall & Firefighting Shaft Wall -Metal Furring Linings |
-Independent I stud wall linings -MF Ceiling System |
||
|
-Suspended Ceilings -Drywall Framed Encasements |
-Office
partitions -Tape and Jointing |

For Quality and Workmanship
From student accommodations, city schools to historical buildings , from mechanical and electrical works to dry lining and partitioning services Team Construction Services has delivered some inspiring projects in its first years. Visit our projects section to find out how we`ve helped our clients and how we could help you.



Partitioning , Suspended Ceilings and Dry Lining
Standard Partitions may be specified with confidence for non-load bearing partitions and use fast drywall construction techniques. For both commercial and domestic partitions Dry lining systems to meet nearly every performance requirement. These systems can utilise the entire range of boards, including wallboard, moisture board, sound shield, fire shield and dense shield, depending on the performance required. The boards are fixed onto a lightweight metal stud. C stud partitions provide the simplest and most economical system, whilst I stud partitions should be used when a more rigid partition is required, without increasing the overall thickness.



Shaft Wall & Firefighting Shaft
Wall
Shaft wall & firefighting shaft wall is
a versatile system for forming
enclosures around service shafts and
lift shafts. For enclosure of lift of
service shafts Up to 2 hours fire
resistance. A fire and moisture
resistant inner lining of coreboard
allows the shaft enclosure to be
constructed prior to the building being
weather sealed. Shaftwall is used
because it is highly durable and is able
to withstand the effects of impact and
water, to which it would be subjected
during a fire, without losing its
integrity or fire resistance. This means
fire crews maintain protected access to
all floors within the buildings
Metal Furring Linings
Metal Furring linings can be used for
most masonry backgrounds depending on
the condition: Where the background is
uneven and not suitable for direct
bonding
Where foil backed boards are used for
the lining Where insulation is not
required within the wall lining void
The system can be applied to the
majority of all common masonry
substrates. Pre-treatment of the
background may be needed, depending on
the background condition and the fixing
method adopted. Any deleterious
deposits, such as mould, oil or grease,
must be removed.
Wall Liner Linings
Wall liner linings may be specified with
confidence for application to most
masonry backgrounds depending on the
condition. Where a variable stand off
clearance is required between lining and
background of between 17 and 125mm
Where the background is out true.
Where insulation is required within the
wall lining void. Where deep
service runs are required to be
accommodated within the lining void.
This system can utilise the entire range
of boards available depending on the
performance requirements. The boards are
fixed onto a lightweight metal framework
of channels fixed to brackets fixed to
the background. This makes it capable to
override substantial irregularities in
the background. The lining void
facilitates the introduction of thermal
or acoustic insulation and provides
containment for service runs. The system
can be applied to the majority of all
common building substrates.
Independent I stud wall linings
Independent I stud wall linings may be
used where background is not suitable to
receive other types of lining. Where the
wall lining is required to be completely
independent of an adjacent wall
structure
Direct to Timber Ceilings
Direct to timber ceilings is the method
for attaching plasterboard to the
underside of timber floor joists and
roof trusses. This system is widely used
to line new ceilings or existing
ceilings and can incorporate any type of
plasterboard to maintain the performance
required.
MF Ceiling System
The MF Ceiling system can accept some
degree of loading and is the more
traditional form of application. This
system can utilise one or more layers of
the entire range of plasterboards
depending on the performance required.
The boards are fixed onto a lightweight
metal framework of primary channels, MF
ceiling channels and perimeter channels.
The lightweight galvanised grid is
suspended by either strap hangers or
angle sections fixed to the structural
soffit with soffit cleats.
Suspended Ceilings
Suspended Ceilings can be installed to
the majority of all applications to
create personalised ceilings and meet
technical requirements such as
acoustics, moisture, hygiene and fire.
This system can utilise many different
styles, colours and textures of
tiles.The tiles are placed in a
galvanised steel grid system hung from
the structural soffit by either wire or
angle sections.
Drywall Framed Encasements
Drywall Framed encasements are suitable
for encasements of columns, beams and
other structural steelwork. Up to two
hours fire protection is achievable and
it enables the exclusive use of fire
shield boards throughout the building to
make direct decoration quick and easy.
Framed encasements utilise fire shields
or moisture shields fixed onto a
lightweight metal framework of C
channels connected to the structural
steelwork with fixing clips.
Direct Bonding
Direct Bonding may be specified with
confidence for application to most
masonry backgrounds depending on the
condition. When minimum cost and
simplicity of application is required
Where the background is plumb, dry and
sound For a stand off of 10-25mm.
This system utilises one layer of
plasterboard or insulating laminate
boards. These boards are fixed with
bonding compound in a regular pattern
known as dot & dab, allowing the boards
to be fixed with minimum projection. The
system allows overriding nominal
irregularities in the background and
will accommodate shallow service runs
within the lining void.
Tape and Jointing
The tape and jointing system is used for
the seamless jointing of tapered edge
boards to walls and ceilings. Jointing
of all flat, internal and external
corner joints is achieved with the
application of two coats of joint filler
and one coat of joint cement to leave a
smooth finish ready for decoration. This
means for faster setting and drying
times, obviously permitting quicker
decoration. Only a small amount of
material is required on site compared to
wet plaster.
|
|
|
|
![]() |
| Company No 5229350 |
| VAT No 853 29 57 02 |
| Tel: 020 850 704 26 |
| Mob: 078 998 507 01 |
| teamconstruction@mail.com |
|
"We are here
to provide
the very
best value
in building
and
refurbishment
services
through
quality work
and
commitment
to our
customer ,
with the
highest
level of
integrity" S.Androff CEO |
| DOMESTIC AND COMMERCIAL |
LOFT CONVERSIONS
EXTENSIONS
REFURBISHMENT
GARAGE CONVERSION
BATHROOMS
TILING
PAINTING & DECORATING
PLUMBING & HEATING
DRAINAGE
ELECTRICAL
ROOFING
PLASTERING
CARPENTRY
FLOORING
DRY LINING
PARTITIONING
![]() |
Soft and hard strip out
Strip out and soft demolitions require a large element of specialist expertise. We have extensive experience in delicate removal of interiors & fittings.
Painting and Decorating
Fitting of standard and ornate Coving Wall-papering service, including standard and hand printed papers Internal paint finishes supplied by Dulux Woodcare Window Repair System Weathershield external paint Specialised effects such as Rag-rolling & colour washing
Shopfront Spraying
Cost effective coatings for the
professional refurbishment of metal surfaces. Developed in association with leading paint manufacturers, our branded coatings are specifically formulated for an on-site spray finish
to all forms of:
Aluminium Shopfronts
Curtain Walling
Metal Staircases
Radiator Casings
Automatic Doors
Dry lining and Partitioning
We provide a complete drylining service. Both metal stud and plasterboard can be combined in many ways to provide the complete solution to your needs. High quality is ensured as all of our work conforms to the British Gypsum White book standard.
Carpentry
We also undertake carpentry packages on construction projects ranging from schools, Hospitals, Student blocks, Universities, and shopping centres
Industrial floor systems
Concrete screed
Epoxy screeds
Floor painting and surface coating
Brick-block laying and paving
Brick and Block Laying
All types of Paving
Plumbing and CORGI services
We carry out all plumbing and heating repairs installations and maintenance
Our pluming and heating division running 24 hours emergency plumbing repairs in East London, please visit our websites:
www.24plumbing.co.uk
www.plumbersdagenham.co.uk
www.plumbersstratford.co.uk
Electrical engineering services
Our team of NICEIC approved engineers providing reliable electrical engineering services for our clients
Post Codes we cover

